Skip to main content

Slipstream Windows 7 + Service Pack 1


I heard that Microsoft released Windows 7 Service Pack 1 yesterday. By sheer coincidence I planned to format and reinstall Windows 7 on my PC, next week.


Is it possible merge (slipstream) the original Windows 7 installation and the new Service Pack 1 in a single ISO image?


Note: Bonus points if you suggest a method that works also for Windows XP.



Answer



WARNING: YMMV. I think we're close, but not quite there yet. These instructions have worked for some people, but I'm getting an error on the last step. So I think we're missing something. It's getting late here, I'm going to flag this as a community wiki. Perhaps you can sort out what I've missed.



Windows 7 slipstreaming is not officially supported. You can use third party tools to accomplish the task. You can also do it yourself manually by unpacking the cab files, editing three text files, and using dism command to update the installation packages. Here's how to do that step by step:




  1. Copy install.wim from your installation disc to your hard drive.




  2. Go to the download Windows 7 Service Pack 1 webpage on the Microsoft website, and then click Continue.




  3. After you have passed the "Genuine Advantage" test, you can choose to download either windows6.1-KB976932-X64.exe, or the 32-bit version windows6.1-KB976932-X86.exe
    Service Pack Download




  4. Extract the contents of the service pack with the -x command. Example: windows6.1-KB976932-X64.exe -x
    Service Pack Download




  5. Extract the contents of windows6.1-KB976932-X64.cab with a tool like 7-Zip (any compression utility that supports cab will do).




  6. Extract the contents of NestedMPPContent.cab into the same folder.




  7. Open update.ses in notepad and change Absent into Installed under OfflineInstall. It should look like:



  8. Open update.mum and Windows7SP1-KB976933~31bf3856ad364e35~amd64~~6.1.1.17514.mum (or the 32-bit equivalent) in notepad and change allowedOffline="false" to allowedOffline="true"




  9. Extract all the language cab files KB976933-LangsCab0 through KB976933-LangsCab6, overwrite files if prompted.




  10. Launch a command prompt with Administrative privileges.
    Run command prompt as Administrator


    Let's assume you stored the extracted service pack files in a folder called C:\sp1. Create a new folder called C:\offline, and note the location of install.wim which should be in the sources folder in your Windows 7 installation disc contents. Use the following commands (change folder names where necessary:


    DISM /Mount-Wim /WimFile:C:\win7-contents\sources\install.wim /Index:1 /MountDir:C:\offline
    DISM /Image:C:\offline /Add-Package /PackagePath:C:\sp1
    DISM /Unmount-Wim /MountDir:C:\offline /Commit


TODO: add instructions for creating bootable disc


Comments

Post a Comment

Popular Posts

How do I transmit a single hexadecimal value serial data in PuTTY using an Alt code?

I am trying to sent a specific hexadecimal value across a serial COM port using PuTTY. Specifically, I want to send the hex codes 9C, B6, FC, and 8B. I have looked up the Alt codes for these and they are 156, 182, 252, and 139 respectively. However, whenever I input the Alt codes, a preceding hex value of C2 is sent before 9C, B6, and 8B so the values that are sent are C2 9C, C2 B6, and C2 8B. The value for FC is changed to C3 FC. Why are these values being placed before the hex value and why is FC being changed altogether? To me, it seems like there is a problem internally converting the Alt code to hex. Is there a way to directly input hex values without using Alt codes in PuTTY? Answer What you're seeing is just ordinary text character set conversion. As far as PuTTY is concerned, you are typing (and reading) text , not raw binary data, therefore it has to convert the text to bytes in whatever configured character set before sending it over the wire. In other words, when y...
Post a Comment
Read more

linux - Extract/save a mail attachment using bash

Using normal bash tools (ie, built-ins or commonly-available command-line tools), is it possible, and how to extract/save attachments on emails? For example, say I have a nightly report which arrives via email but is a zip archive of several log files. I want to save all those zips into a backup directory. How would I accomplish that? Answer If you're aiming for portability, beware that there are several different versions of mail(1) and mailx(1) . There's a POSIX mailx command, but with very few requirements. And none of the implementations I have seem to parse attachments anyway. You might have the mpack package . Its munpack command saves all parts of a MIME message into separate files, then all you have to do is save the interesting parts and clean up the rest. There's also metamail . An equivalent of munpack is metamail -wy .
Post a Comment
Read more

ubuntu - Why does my USB hdd returns SG_IO: bad/missing sense data?

I am able to boot and run commands from external USB hdd; the message in question appears for about 45 seconds then booting continues. GRUB2 is installed on internal HDD. When choosing to boot directly to /dev/sdb the message doesn't appear, however boot time is about the same as booting to internal HDD. /dev/sdb: Timing cached reads: 1018 MB in 2.00 seconds = 508.97 MB/sec Timing buffered disk reads: 80 MB in 3.03 seconds = 26.37 MB/sec pfeiffep@de:~$ sudo hdparm -i /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 10 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_GET_IDENTITY failed: Invalid argument Gparted correctly identifies the drive as SAMSUNG MP0402H. Any ideas how to remedy the HDIO & SG_IO messages?
Post a Comment
Read more

Desktop reboots itself on sleep or hibernate

I have been using an ASUS M2NPV-VM motherboard for main home desktop workstation, operating Windows Vista x64. This computer has right from day one not been able to enter hibernate or standby; after Windows performs its final actions and brings the machine down, it would automatically revive itself for a reboot. Updating to the second latest BIOS (1201)has not helped (the latest BIOS revision would induce video refresh problems rendering it unusable). I have been reading related discussions on incidents similar to mine to no avail of a true workable solution. They appear to be more speculative guesses rather than actual knowledge on the inner workings of motherboard hardware. Does anybody have any electronic engineering experience on PC energy-saving standards to provide a more informed opinion how to go about getting this to work? More stories: this motherboard could not even reboot properly the first thing i used it. It was due to refresh rate of the onboard GPU, which had no influe...
Post a Comment
Read more