Skip to main content

Why shouldn't I attach laser printers or scanners to a UPS?


I have an FSP EP1000 UPS.


The User's Manual says:



CAUTION: NEVER connect a laser printer or scanner to the UPS unit. This may cause the damage of the unit.



Why is this restriction?



Answer



Updated


Why you shouldn't connect a printer to a UPS


(Unless you accurately size the UPS for peak power requirements)


When turned on, Laser printers draw a high current to heat up their fuser roller. A typical UPS cannot cope with such a spike.


Descriptions of the problem by UPS manufacturers do not go into details.


The problem may be one or other of



  • The initial inrush current at start-up, This can be seven or more times the average operating current of the printer.

  • Initial power-on when the fuser is heated to the temperature needed to fuse toner. Subsequent re-heating of the fuser may be periodic or may occur when the printer switches from and idle state to full-power to satisfy a print request after a period of inactivity.


Fuser temperature is up to 200 °C (392 °F).



Printer Information


From HP specification for LaserJet 3200


Power consumption   135 watts

During Printing: At nominal line voltage.   
  Model A (120V): Maximum of 700 W, Average of 210 W 
  Model AB (240V): Maximum of 625 W, Average of 210 W

Inrush Current: (Duration: significantly < 1 second)    
  Model A  (120V): 23 A peak (20 deg C, from cold start) 
  Model AB (240V): 40 A peak (20 deg C, from cold start)

Note:


If we disregard power factors and other AC complications,



  • The (overall average?) power usage quoted at 135W at 120V would draw a little over 1 Amp.

  • The active average power usage quoted at 210W at 120V would draw just under 2 Amps.

  • The maximum active power usage quoted at 700W at 120V would draw well over 5 Amps.


The inrush current is an order of magnitude larger than average operating currents.


In conjunction with other equipment, the 700W max during printing could overload a small UPS.



UPS Information


For example Belkin say



A laser printer or scanner draws significantly more power when in use than when idle. This may overload the UPS.



APC say



APC recommends a [UPS] that is sized for the maximum power draw of the laser printer as defined by the manufacturer. This is typically a 1500va or larger UPS. Even small laser printers can have very high maximum power draws due to the nature of the technology.



Anecdotal reports say


Laser printer usage is sometimes reported as causing voltage sags in power circuits such that lights noticeably dim in the building for a brief moment.



Here is an example of power used vs time.


Brother 5250 current draw


From http://www.johndearmond.com/2008/08/04/laser-printers-and-inverters/


Comments

Post a Comment

Popular Posts

How do I transmit a single hexadecimal value serial data in PuTTY using an Alt code?

I am trying to sent a specific hexadecimal value across a serial COM port using PuTTY. Specifically, I want to send the hex codes 9C, B6, FC, and 8B. I have looked up the Alt codes for these and they are 156, 182, 252, and 139 respectively. However, whenever I input the Alt codes, a preceding hex value of C2 is sent before 9C, B6, and 8B so the values that are sent are C2 9C, C2 B6, and C2 8B. The value for FC is changed to C3 FC. Why are these values being placed before the hex value and why is FC being changed altogether? To me, it seems like there is a problem internally converting the Alt code to hex. Is there a way to directly input hex values without using Alt codes in PuTTY? Answer What you're seeing is just ordinary text character set conversion. As far as PuTTY is concerned, you are typing (and reading) text , not raw binary data, therefore it has to convert the text to bytes in whatever configured character set before sending it over the wire. In other words, when y...
Post a Comment
Read more

linux - Extract/save a mail attachment using bash

Using normal bash tools (ie, built-ins or commonly-available command-line tools), is it possible, and how to extract/save attachments on emails? For example, say I have a nightly report which arrives via email but is a zip archive of several log files. I want to save all those zips into a backup directory. How would I accomplish that? Answer If you're aiming for portability, beware that there are several different versions of mail(1) and mailx(1) . There's a POSIX mailx command, but with very few requirements. And none of the implementations I have seem to parse attachments anyway. You might have the mpack package . Its munpack command saves all parts of a MIME message into separate files, then all you have to do is save the interesting parts and clean up the rest. There's also metamail . An equivalent of munpack is metamail -wy .
Post a Comment
Read more

ubuntu - Why does my USB hdd returns SG_IO: bad/missing sense data?

I am able to boot and run commands from external USB hdd; the message in question appears for about 45 seconds then booting continues. GRUB2 is installed on internal HDD. When choosing to boot directly to /dev/sdb the message doesn't appear, however boot time is about the same as booting to internal HDD. /dev/sdb: Timing cached reads: 1018 MB in 2.00 seconds = 508.97 MB/sec Timing buffered disk reads: 80 MB in 3.03 seconds = 26.37 MB/sec pfeiffep@de:~$ sudo hdparm -i /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 10 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_GET_IDENTITY failed: Invalid argument Gparted correctly identifies the drive as SAMSUNG MP0402H. Any ideas how to remedy the HDIO & SG_IO messages?
Post a Comment
Read more

Desktop reboots itself on sleep or hibernate

I have been using an ASUS M2NPV-VM motherboard for main home desktop workstation, operating Windows Vista x64. This computer has right from day one not been able to enter hibernate or standby; after Windows performs its final actions and brings the machine down, it would automatically revive itself for a reboot. Updating to the second latest BIOS (1201)has not helped (the latest BIOS revision would induce video refresh problems rendering it unusable). I have been reading related discussions on incidents similar to mine to no avail of a true workable solution. They appear to be more speculative guesses rather than actual knowledge on the inner workings of motherboard hardware. Does anybody have any electronic engineering experience on PC energy-saving standards to provide a more informed opinion how to go about getting this to work? More stories: this motherboard could not even reboot properly the first thing i used it. It was due to refresh rate of the onboard GPU, which had no influe...
Post a Comment
Read more