Skip to main content

windows home server - Can I make my PC backup and then sleep on demand with WHS?


I really hate the way that WHS backs up at a particular time in the morning.




  • First of all I don't EVER want my computer turning on when I am not there. EVER. I have a Core-i7 laptop which literally could burn the house down quite easily if it were to turn on in a bag.




  • I also don't ever want my PC to sleep unless I tell it to. I don't have hibernation or sleep enabled and this is the only way that WHS will sleep after a backup is complete.




  • I know that Windows 7 has the ability to disable waking up when on battery power but it doesn't seem to work on my laptop.




These are the possibilities (with wake timers left as default):



  • 'Wake this computer for backup' ON - it turns on in my bag if i forget to turn it off - and stays on when the backup is complete.

  • 'Wake this computer for backup' OFF - it backs up in the morning, but I need to leave the machine on all night.

  • I say 'Backup Now' and then it backs up immediately. I can turn it off when its done if I'm still awake, but then that backup appears as 'locked' in the console and not 'automatically managed'.


What I'd really like to do is :



  • Click 'Backup and Sleep' and then go to bed.

  • It will backup immediately and then sleep the PC.

  • This backup must be 'automatically managed' and not appear as a 'locked backup' in my console

  • Show me a confirmation that everything was backed up successfully (or not) when I turn it on.


Is there any way to achieve this?



Answer



I finally figured out a solution to this that works quite well for mw.


Basically I wrote a script to run a backup and then sleep immediately when complete.



  • Disable wake timers (if using Windows 7). This should prevent your PC from waking up at your normal backup time. Unfortunately there is no way to disable backups while still allowing manual backups to be triggered.

  • Set the backup time to be a time when you're asleep - like 4-5am

  • Replace 'IKE' below with the name of your server

  • Rename C:\Program Files\Windows Home Server\BackupEngine.exe to _BackupEngine.exe. I couldn't find any other way to completely prevent backups being automatically triggered. When i turn on my PC again in the morning it was trying to backup immediately.


  • Run this .BAT file as an administrator (important):


    echo %date% %time%
    ping ike
    sleep 5
    echo STARTING BACKUP %date% %time%
    del "C:\Program Files\Windows Home Server\BackupEngine.exe" 
    "C:\Program Files\Windows Home Server\_BackupEngine.exe" -a -d "Manual Nighttime Backup" -s ike
    echo %date% %time%
    %windir%\System32\rundll32.exe powrprof.dll,SetSuspendState Standby
    pause


Note: I had to delete BackupEngine.exe in the script because it gets repaired everytime the WHS console restarts on a reboot. If this file exists it will still try to run a backup when you turn the PC on again in the morning even if the backup time has passed. Doh!


For more details about the command to 'sleep' see this.


NOTE: This is still a work in progress. Has worked for a few days and i will improve this over time. I really really want to get this functionality into Vail (WHS2) if not already there.


Comments

Post a Comment

Popular Posts

How do I transmit a single hexadecimal value serial data in PuTTY using an Alt code?

I am trying to sent a specific hexadecimal value across a serial COM port using PuTTY. Specifically, I want to send the hex codes 9C, B6, FC, and 8B. I have looked up the Alt codes for these and they are 156, 182, 252, and 139 respectively. However, whenever I input the Alt codes, a preceding hex value of C2 is sent before 9C, B6, and 8B so the values that are sent are C2 9C, C2 B6, and C2 8B. The value for FC is changed to C3 FC. Why are these values being placed before the hex value and why is FC being changed altogether? To me, it seems like there is a problem internally converting the Alt code to hex. Is there a way to directly input hex values without using Alt codes in PuTTY? Answer What you're seeing is just ordinary text character set conversion. As far as PuTTY is concerned, you are typing (and reading) text , not raw binary data, therefore it has to convert the text to bytes in whatever configured character set before sending it over the wire. In other words, when y...
Post a Comment
Read more

linux - Extract/save a mail attachment using bash

Using normal bash tools (ie, built-ins or commonly-available command-line tools), is it possible, and how to extract/save attachments on emails? For example, say I have a nightly report which arrives via email but is a zip archive of several log files. I want to save all those zips into a backup directory. How would I accomplish that? Answer If you're aiming for portability, beware that there are several different versions of mail(1) and mailx(1) . There's a POSIX mailx command, but with very few requirements. And none of the implementations I have seem to parse attachments anyway. You might have the mpack package . Its munpack command saves all parts of a MIME message into separate files, then all you have to do is save the interesting parts and clean up the rest. There's also metamail . An equivalent of munpack is metamail -wy .
Post a Comment
Read more

ubuntu - Why does my USB hdd returns SG_IO: bad/missing sense data?

I am able to boot and run commands from external USB hdd; the message in question appears for about 45 seconds then booting continues. GRUB2 is installed on internal HDD. When choosing to boot directly to /dev/sdb the message doesn't appear, however boot time is about the same as booting to internal HDD. /dev/sdb: Timing cached reads: 1018 MB in 2.00 seconds = 508.97 MB/sec Timing buffered disk reads: 80 MB in 3.03 seconds = 26.37 MB/sec pfeiffep@de:~$ sudo hdparm -i /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 10 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_GET_IDENTITY failed: Invalid argument Gparted correctly identifies the drive as SAMSUNG MP0402H. Any ideas how to remedy the HDIO & SG_IO messages?
Post a Comment
Read more

Desktop reboots itself on sleep or hibernate

I have been using an ASUS M2NPV-VM motherboard for main home desktop workstation, operating Windows Vista x64. This computer has right from day one not been able to enter hibernate or standby; after Windows performs its final actions and brings the machine down, it would automatically revive itself for a reboot. Updating to the second latest BIOS (1201)has not helped (the latest BIOS revision would induce video refresh problems rendering it unusable). I have been reading related discussions on incidents similar to mine to no avail of a true workable solution. They appear to be more speculative guesses rather than actual knowledge on the inner workings of motherboard hardware. Does anybody have any electronic engineering experience on PC energy-saving standards to provide a more informed opinion how to go about getting this to work? More stories: this motherboard could not even reboot properly the first thing i used it. It was due to refresh rate of the onboard GPU, which had no influe...
Post a Comment
Read more