Skip to main content

usb flash drive - 8GB memory stick only showing 49MB


I have an 8GB Sony USB memory stick and only 49 MB are being detected. I've tried on multiple USB ports and tried formatting it several times.


screen shot


I checked it for errors and it said none are found. I want to use it to install Windows 8 off of but 49MB is way too small.


By the way, what's the most universally accepted name: thumbdrive, usb memory stick, jump drive, flash drive (I thought flash memory was for digital cameras)?



Answer



Probably you've flashed some boot USB or ISO image which have size of only ~49MB. That process clears the flash drive's MBR and replaces it with the one in the image that contains a small partition. You can verify that by opening diskmgmt.msc and check if there is only a single 49MB partition


If that's correct then just delete and recreate the partition. Or use some 3rd party partitioning tools like gparted, or EaseUS® Partition Master or MiniTool® Partition Wizard Home Edition to extend/recreate the partition


Another GUI solution is Rufus




So, you created a bootable drive, possibly with a DD image, and now Windows no longer seems to see it, or it reports that its capacity is much smaller than it actually is. And now you want to "restore" it to a state where you could just use it to copy files, with Windows recognizing the drive and letting you use its full capacity.


Well, what you really want to do is "restore" your drive to non-bootable state. And, of course Rufus has a very prominent way to allow you to do that.


See the Boot selection dropdown in Rufus? The one that has a Non bootable entry? Well, if you select that option, and then pick whatever you want for the file system, then Rufus will happily "restore" your media to something Windows will recognize, with full capacity, and that you can use again to transfer files. That's all there is to it.



If you don't want to use GUI then there's the built-in diskpart that you can read about its usage in the other question




Comments

Post a Comment

Popular Posts

How do I transmit a single hexadecimal value serial data in PuTTY using an Alt code?

I am trying to sent a specific hexadecimal value across a serial COM port using PuTTY. Specifically, I want to send the hex codes 9C, B6, FC, and 8B. I have looked up the Alt codes for these and they are 156, 182, 252, and 139 respectively. However, whenever I input the Alt codes, a preceding hex value of C2 is sent before 9C, B6, and 8B so the values that are sent are C2 9C, C2 B6, and C2 8B. The value for FC is changed to C3 FC. Why are these values being placed before the hex value and why is FC being changed altogether? To me, it seems like there is a problem internally converting the Alt code to hex. Is there a way to directly input hex values without using Alt codes in PuTTY? Answer What you're seeing is just ordinary text character set conversion. As far as PuTTY is concerned, you are typing (and reading) text , not raw binary data, therefore it has to convert the text to bytes in whatever configured character set before sending it over the wire. In other words, when y...
Post a Comment
Read more

linux - Extract/save a mail attachment using bash

Using normal bash tools (ie, built-ins or commonly-available command-line tools), is it possible, and how to extract/save attachments on emails? For example, say I have a nightly report which arrives via email but is a zip archive of several log files. I want to save all those zips into a backup directory. How would I accomplish that? Answer If you're aiming for portability, beware that there are several different versions of mail(1) and mailx(1) . There's a POSIX mailx command, but with very few requirements. And none of the implementations I have seem to parse attachments anyway. You might have the mpack package . Its munpack command saves all parts of a MIME message into separate files, then all you have to do is save the interesting parts and clean up the rest. There's also metamail . An equivalent of munpack is metamail -wy .
Post a Comment
Read more

ubuntu - Why does my USB hdd returns SG_IO: bad/missing sense data?

I am able to boot and run commands from external USB hdd; the message in question appears for about 45 seconds then booting continues. GRUB2 is installed on internal HDD. When choosing to boot directly to /dev/sdb the message doesn't appear, however boot time is about the same as booting to internal HDD. /dev/sdb: Timing cached reads: 1018 MB in 2.00 seconds = 508.97 MB/sec Timing buffered disk reads: 80 MB in 3.03 seconds = 26.37 MB/sec pfeiffep@de:~$ sudo hdparm -i /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 10 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_GET_IDENTITY failed: Invalid argument Gparted correctly identifies the drive as SAMSUNG MP0402H. Any ideas how to remedy the HDIO & SG_IO messages?
Post a Comment
Read more

Desktop reboots itself on sleep or hibernate

I have been using an ASUS M2NPV-VM motherboard for main home desktop workstation, operating Windows Vista x64. This computer has right from day one not been able to enter hibernate or standby; after Windows performs its final actions and brings the machine down, it would automatically revive itself for a reboot. Updating to the second latest BIOS (1201)has not helped (the latest BIOS revision would induce video refresh problems rendering it unusable). I have been reading related discussions on incidents similar to mine to no avail of a true workable solution. They appear to be more speculative guesses rather than actual knowledge on the inner workings of motherboard hardware. Does anybody have any electronic engineering experience on PC energy-saving standards to provide a more informed opinion how to go about getting this to work? More stories: this motherboard could not even reboot properly the first thing i used it. It was due to refresh rate of the onboard GPU, which had no influe...
Post a Comment
Read more