Skip to main content

Accessing Time Machine backup from Windows/Linux laptops


I'm wondering if I can access my time machine backup from Windows or Linux computers... I'm just wondering what'll happen if my computer fails and I don't have enough money to buy a new mac...



Answer



It CAN be read from linux (By using Ubuntu for example) but it is a tough nut to crack. Windows can't do it at all.



The following commands need to be executed as a privileged user. To gain the necessary rights do


$ sudo su

You should then be prompted with the root shell.



The following came from http://hints.macworld.com/article.php?story=20080623213342356



It turns out Apple does a couple slick things with the file system to make incremental backups work, including hard linking to directories, which isn't allowed in Linux. So for anyone that needs to access their Time Machine from something other than its associated Mac, here's how you do it...


1 - Mount the drive. On linux, it should automount if you have gnome-volume-manager installed. If you don't see it in /media, then run nautilus and check the desktop. Still don't see it? Read man mount. And then don't forget the -t hfsplus flag.


2 - Change directory. My mount point is /media/Time Machine/. Within that path, I find the directory Backups.backupdb. This represents the directory layout of your backup system. Inside that directory is the name of your disk. Inside that are folders labeled with dates corresponding to each incremental backup that was made. Pick the one you want, or choose the Latest symlink. For example, my path is now:



/media/Time Machine/Backups.backupdb/Drive 1/2008-06-05-073745


3 - Find your file's folder. Within that path is a complete representation of your filesystem. Navigate to the location of your file. If it's not too big or nested too deep, it may be plainly visible. However, there's a good chance that its parent directory doesn't exist. Instead you'll see a zero-byte file for the parent that takes its name and acts as a pointer. Run ls -l and take note of the first numbered column. Example:



...
-r--r--r-- 2155704 root 5791966       0 2007-06-25 02:54 Wallpaper
-r--r--r-- 2155725 root 5791967       0 2007-06-25 02:54 Web-Identity
-r--r--r-- 5441953 root 5791968       0 2007-06-25 02:54 Windows
-r--r--r-- 5511926 root 5791969       0 2007-06-25 02:54 Work


After the permissions, you'll see the directory number that typically refers to the number of directories within that folder. For a file, it should always be 1, but here it is not. What Apple has done is adjust the information in this file's inode to use it as a pointer to the directory that contains the actual file. That way, multiple revisions of the same drive can coexist without duplicating data.


4 - Find the data. In my case, I want to grab something out of the Wallpaper folder. First I made a note of the directory number, 2155704, and then did cd /media/Time Machine/.HFS+ Private Directory Data -- this is where the data really lives. From there, I just did cd dir_2155704, and voilà !



Comments

Post a Comment

Popular Posts

How do I transmit a single hexadecimal value serial data in PuTTY using an Alt code?

I am trying to sent a specific hexadecimal value across a serial COM port using PuTTY. Specifically, I want to send the hex codes 9C, B6, FC, and 8B. I have looked up the Alt codes for these and they are 156, 182, 252, and 139 respectively. However, whenever I input the Alt codes, a preceding hex value of C2 is sent before 9C, B6, and 8B so the values that are sent are C2 9C, C2 B6, and C2 8B. The value for FC is changed to C3 FC. Why are these values being placed before the hex value and why is FC being changed altogether? To me, it seems like there is a problem internally converting the Alt code to hex. Is there a way to directly input hex values without using Alt codes in PuTTY? Answer What you're seeing is just ordinary text character set conversion. As far as PuTTY is concerned, you are typing (and reading) text , not raw binary data, therefore it has to convert the text to bytes in whatever configured character set before sending it over the wire. In other words, when y...
Post a Comment
Read more

linux - Extract/save a mail attachment using bash

Using normal bash tools (ie, built-ins or commonly-available command-line tools), is it possible, and how to extract/save attachments on emails? For example, say I have a nightly report which arrives via email but is a zip archive of several log files. I want to save all those zips into a backup directory. How would I accomplish that? Answer If you're aiming for portability, beware that there are several different versions of mail(1) and mailx(1) . There's a POSIX mailx command, but with very few requirements. And none of the implementations I have seem to parse attachments anyway. You might have the mpack package . Its munpack command saves all parts of a MIME message into separate files, then all you have to do is save the interesting parts and clean up the rest. There's also metamail . An equivalent of munpack is metamail -wy .
Post a Comment
Read more

ubuntu - Why does my USB hdd returns SG_IO: bad/missing sense data?

I am able to boot and run commands from external USB hdd; the message in question appears for about 45 seconds then booting continues. GRUB2 is installed on internal HDD. When choosing to boot directly to /dev/sdb the message doesn't appear, however boot time is about the same as booting to internal HDD. /dev/sdb: Timing cached reads: 1018 MB in 2.00 seconds = 508.97 MB/sec Timing buffered disk reads: 80 MB in 3.03 seconds = 26.37 MB/sec pfeiffep@de:~$ sudo hdparm -i /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 10 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_GET_IDENTITY failed: Invalid argument Gparted correctly identifies the drive as SAMSUNG MP0402H. Any ideas how to remedy the HDIO & SG_IO messages?
Post a Comment
Read more

Desktop reboots itself on sleep or hibernate

I have been using an ASUS M2NPV-VM motherboard for main home desktop workstation, operating Windows Vista x64. This computer has right from day one not been able to enter hibernate or standby; after Windows performs its final actions and brings the machine down, it would automatically revive itself for a reboot. Updating to the second latest BIOS (1201)has not helped (the latest BIOS revision would induce video refresh problems rendering it unusable). I have been reading related discussions on incidents similar to mine to no avail of a true workable solution. They appear to be more speculative guesses rather than actual knowledge on the inner workings of motherboard hardware. Does anybody have any electronic engineering experience on PC energy-saving standards to provide a more informed opinion how to go about getting this to work? More stories: this motherboard could not even reboot properly the first thing i used it. It was due to refresh rate of the onboard GPU, which had no influe...
Post a Comment
Read more