Skip to main content

windows 7 - How do I recover the content from Notepad when the task froze?


If Notepad (the Microsoft Notepad that comes preinstalled with Windows, in my case Windows 7) froze before I had a chance to save the content to a file, is there a way to recover the content? Notepad does not have some kind of "backup" on the hard disk. I don't think in any windows version does notepad keep any data on disk.


It's all in the memory, or if you opened an existing file that has already been stored on disc all the changes are in the memory. So if the task is still there just frozen, the memory should still be there. I got the idea from my first attempt to resolve the issue by "unfreezing" notepad (see How do I analyze a notepad crash? (Windows7)). If unfreezing doesn't work, the problem remains of recovering the data.


Please note, this is a very different scenario form the one stated in the following question: How do we "restore" notepad after crash? There the memory is wiped clean because of the reboot, in my case all the data is still in the memory.



Answer



If the notepad task/process still exists, the text within notepad is still stored within the computers main memory.


One way to access it is to make a complete memory dump of the process and recover your text from there. It takes me about 5 min (but you most likely need to add some time if you do it for the first few times, depending on your back ground knowledge - consider to add 10-20min). But you will be able to recover your complete text.


To store the memory dump you need a task manager that can store dump files, you can use the Windows build in task manager, personally I use the freeware tool Processhacker.



  • Open your task manager

  • Select the frozen note pad task

  • choose to save a dump file, through the menu or context menu (use "complete dump" if the software gives you a choice there)

  • save the dump file to disk


You can analyse the it using a regular Windows Hex-Editor (for example HxD Hex Editor) and recover your data:



  • Open the memory dump file within the Hex-Editor. It is usually quite large (50.000k or more, even it only showed less 1.000k in the task manager) because it contains much more then just the text your wrote into notepad, most of it unreadable gibberish.

  • To find "your text" within the dump file use the "search" of your HEX-Editor. Search for any part of your text that was in notepad, for example a part of a sentence or a word (make sure you select the right encoding method when searching, usually it's Unicode)

  • Once you find it within the dump file, mark the whole section that contains all your text from notepad

  • Copy and paste it into a "proper" text editor (for example Notepad++, don't use MS notepad because you won't be able to get rid of the special characters as described in the next step)

  • After you pasted your text into a text editor usually you will see a "special character" between each character of your original text you can remove everyone simply remove it by using the "replace all" feature of your text editor (the special character can be added by copy&paste).


Voila, there's you're recovered data...


PS. Some times there is also some further clean up to be done, part of your text might be there two times one time readable one time "half readable. In this case just delete the half readable copy. But it's "always different" so you just need to check if this is the case with your text as well.


PPS. With HxD Hex Editor you can also access the memory directly without saving it to disc first. In the menue under "Extras" click on "Open Memory" (make sure to uncheck the box that hides the "unreadable" memory, when you select your task)


Comments

Post a Comment

Popular Posts

How do I transmit a single hexadecimal value serial data in PuTTY using an Alt code?

I am trying to sent a specific hexadecimal value across a serial COM port using PuTTY. Specifically, I want to send the hex codes 9C, B6, FC, and 8B. I have looked up the Alt codes for these and they are 156, 182, 252, and 139 respectively. However, whenever I input the Alt codes, a preceding hex value of C2 is sent before 9C, B6, and 8B so the values that are sent are C2 9C, C2 B6, and C2 8B. The value for FC is changed to C3 FC. Why are these values being placed before the hex value and why is FC being changed altogether? To me, it seems like there is a problem internally converting the Alt code to hex. Is there a way to directly input hex values without using Alt codes in PuTTY? Answer What you're seeing is just ordinary text character set conversion. As far as PuTTY is concerned, you are typing (and reading) text , not raw binary data, therefore it has to convert the text to bytes in whatever configured character set before sending it over the wire. In other words, when y...
Post a Comment
Read more

linux - Extract/save a mail attachment using bash

Using normal bash tools (ie, built-ins or commonly-available command-line tools), is it possible, and how to extract/save attachments on emails? For example, say I have a nightly report which arrives via email but is a zip archive of several log files. I want to save all those zips into a backup directory. How would I accomplish that? Answer If you're aiming for portability, beware that there are several different versions of mail(1) and mailx(1) . There's a POSIX mailx command, but with very few requirements. And none of the implementations I have seem to parse attachments anyway. You might have the mpack package . Its munpack command saves all parts of a MIME message into separate files, then all you have to do is save the interesting parts and clean up the rest. There's also metamail . An equivalent of munpack is metamail -wy .
Post a Comment
Read more

ubuntu - Why does my USB hdd returns SG_IO: bad/missing sense data?

I am able to boot and run commands from external USB hdd; the message in question appears for about 45 seconds then booting continues. GRUB2 is installed on internal HDD. When choosing to boot directly to /dev/sdb the message doesn't appear, however boot time is about the same as booting to internal HDD. /dev/sdb: Timing cached reads: 1018 MB in 2.00 seconds = 508.97 MB/sec Timing buffered disk reads: 80 MB in 3.03 seconds = 26.37 MB/sec pfeiffep@de:~$ sudo hdparm -i /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 10 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_GET_IDENTITY failed: Invalid argument Gparted correctly identifies the drive as SAMSUNG MP0402H. Any ideas how to remedy the HDIO & SG_IO messages?
Post a Comment
Read more

Desktop reboots itself on sleep or hibernate

I have been using an ASUS M2NPV-VM motherboard for main home desktop workstation, operating Windows Vista x64. This computer has right from day one not been able to enter hibernate or standby; after Windows performs its final actions and brings the machine down, it would automatically revive itself for a reboot. Updating to the second latest BIOS (1201)has not helped (the latest BIOS revision would induce video refresh problems rendering it unusable). I have been reading related discussions on incidents similar to mine to no avail of a true workable solution. They appear to be more speculative guesses rather than actual knowledge on the inner workings of motherboard hardware. Does anybody have any electronic engineering experience on PC energy-saving standards to provide a more informed opinion how to go about getting this to work? More stories: this motherboard could not even reboot properly the first thing i used it. It was due to refresh rate of the onboard GPU, which had no influe...
Post a Comment
Read more