Skip to main content

How to connect my front audio panel?


My motherboard is Gigabyte GA-945PL-S3. So due cleanning I had to disconnect front audio panel wires. Then I installed Windows 7 on a new hard drive. But now I don't know how to plug the wires back. Well I plugged how I remember (hope didn't damage it) but Realtek HD Audio Manager can't detect speakers nor microphone at front panel, everything seems to be fine on back panel. This is what manual show:


enter image description here


This is how it was before (that worked - but can't see well) enter image description here From front panel comes these wires:
2x GND(black)
Mic Bias(yellow)
Mic in(green)
Left out(red)
Right out(white)


Edit
I have found the problem. It was in Realtek Manager itself. I had to disable "Detect front panel sound".



Answer



My motherboard is a Gigabyte GA-H87-HD3 and I was having the same problem of Realtek HD Audio Manager not detecting speakers in the front panel. After trying all kinds of solutions and reading the MB's manual dozens of times, I found out it was simply a matter of checking a checkbox!


Double-click the red speaker in the tray:


enter image description here


It will open Realtek HD Audio Manager. Click the yellow folder icon next to the upper-right corner of the window:


enter image description here


This is the important part. Although it may seem contradictory, you have to check the option that says "Disable front panel jack detection":


enter image description here


Now the front panel icons are enabled:


enter image description here


And now your front panel audio should be working.


If you still have no sound, maybe this more technical answer could enlighten you.


Comments

Post a Comment

Popular Posts

keyboard - Is there any utility/method to change Windows key bindings to type rare chars to currently empty bindings?

I'm currently typing this post with my windows XP machine and (Spanish) keyboard, and I'd like to add some extra symbols to my text. I could open the "char map" windows utility, look for the desired symbols, and paste them. But I'd like something quickier. For example, when I'm using my OSX Mac at work, I can easily add a ©, ™, ® or similar symbols, just pressing some weird ALT-GR + G / H / J, key combinations. In my (Spanish) keyboard mapping, these combinations are empty, as they don't produce any char at all, which, on the other hand, is perfectly normal and desirable. So, I thought: Why couldn't I add some extra key mappings on top of my currently empty ALT-GR + G/J/H Keys in my Spanish keyboard, and thus, being able to quickly type these special symbols? So that's my question: Is there any utility/method to achieve that effect under windows? (My version is XP). I've even googled this for some time but no luck. I've been a long term Hot...
Post a Comment
Read more

virtualization - How to select paravirtualization interface in VirtualBox?

Given a windows 8 host system (Intel Core i5) and a Linux Fedora host, I would like to determine the optimal setting for the paravirtual interface. Options are none Default Legacy minimal Hyper-V KVM This page suggest the selection is only based on the guest system: The biggest change in VirtualBox 5.0 is the introduction of paravirtualization support, bringing higher performance and time-keeping accuracy to supported guest operating systems (Hyper-V on Windows and KVM on Linux). Is that correct? Answer The VirtualBox Manual , in the section titled Paravirtualization providers explains very clearly when each should be used (emphasis added): Minimal: Announces the presence of a virtualized environment. Additionally, reports the TSC and APIC frequency to the guest operating system. This provider is mandatory for running any Mac OS X guests. KVM: Presents a Linux KVM hypervisor interface which is recognized by Linux kernels starting with version 2.6.25. VirtualBox's implementati...
Post a Comment
Read more

Desktop reboots itself on sleep or hibernate

I have been using an ASUS M2NPV-VM motherboard for main home desktop workstation, operating Windows Vista x64. This computer has right from day one not been able to enter hibernate or standby; after Windows performs its final actions and brings the machine down, it would automatically revive itself for a reboot. Updating to the second latest BIOS (1201)has not helped (the latest BIOS revision would induce video refresh problems rendering it unusable). I have been reading related discussions on incidents similar to mine to no avail of a true workable solution. They appear to be more speculative guesses rather than actual knowledge on the inner workings of motherboard hardware. Does anybody have any electronic engineering experience on PC energy-saving standards to provide a more informed opinion how to go about getting this to work? More stories: this motherboard could not even reboot properly the first thing i used it. It was due to refresh rate of the onboard GPU, which had no influe...
Post a Comment
Read more

security - How is Linux not prone to viruses, malware and those kinds of things?

How is Linux protected against viruses? This question was a Super User Question of the Week . Read the blog entry for more details or contribute to the blog yourself Answer Well, it factually is not... it's just less subject to hackers developing viruses that target Linux systems. Consumer grade computers usually run on Windows and thus, when targeting a wide audience, Windows is the way to go. Don't misunderstand Linux and viruses, there definitely ARE Linux viruses. Some distros have additional protection layers such as SELinux (See here ) in Ubuntu for example. Then there's the default firewall and the fact that alien files don't automatically have permission to be executed. Specific execution permission has to be granted before execution is possible. (See here ) Then there are several other factors that make Linux a hard place to be for viruses usually non-root users on linux systems have no to little executable files at their disposal that would allow for virus...
Post a Comment
Read more