Skip to main content

linux - Split MPEG video from command line?


I have a homemade DVD that I'm effectively trying to insert chapters into and rearrange - the original author burned it as one long chapter, and I'd like to rip it into smaller pieces and re-encode it into a new DVD. I ripped the DVD with the following command:


mplayer dvd:// -dvd-device /dev/sr2 -dumpstream -dumpfile raw.vob

I'm running Gentoo Linux with mplayer version 1.0-rc2_p20090731 (the latest available in Portage).


I have a list of times that the chapters are supposed to span (for example 30:11-33:25), so my first thought was to rip the entire DVD and use mpgtx to cut out certain pieces of the file. My issue is that running mpgtx -i on the file reports quite a few timestamp jumps:


Time stamps jumped from 59.753789 to 0.001622 at position 1d29800
Time stamps jumped from 204963823030450.343750 to 31.165900 at position 2d4f800
Time stamps jumped from 60.077878 to 0.001622 at position 43cc000
Time stamps jumped from 60.024233 to 0.001622 at position 65c5000
Time stamps jumped from 204963823068631.718750 to 52.549244 at position 7fd1000

I've tried to fix the indexes using:


mencoder raw.vob -oac copy -ovc copy -forceidx -o fixed.vob -of mpeg

But mpgtx will still report timestamp issues. My immediate question: is there a way to take the ripped movie I have and correct its timestamps so I can cut it with mpgtx? If I can get that one issue out of the way, building the rest of the DVD will be smooth sailing.


If it's not possible to fix the timestamps on this file: is there a better way to rip small chunks of the DVD into separate files for recompilation later? I'd very much like this to be done on Linux, and it'd be even better if I could script it somehow (feed in a list of start and end positions, or start times and durations, and get out a series of ripped files). If need be, I also have a Mac OS X machine available, but no Windows.


Edit: I wound up finding another solution involving HandBrake and ffmpeg (with help from this question), but the question stands.


Edit again: Turns out my other solution didn't quite work - the audio desynchronized by about five seconds, in about half of my cut mpgs - so I'm back to square one. Anyone?



Answer



FFmpeg will do this for you.


Your command might look something like this:


Code: ffmpeg -i input.mpg -ss 00:00:10 -t 00:00:30 out1.mpg -ss is the start point in hh:mm:ss from the beginning of your video file


-t is the length of time in hh:mm:ss of your new segment.


So, in the above example, you're starting 10 seconds in from the beginning of the original file and ending 30 seconds later.


If you want to create multiple parts in one pass then the following should work:


Code: ffmpeg -i input.mpg -ss 00:00:10 -t 00:00:30 out1.mpg -ss 00:00:35 -t 00:00:30 out2.mpg In this example, the first segment is the same as the first example, but you're also creating a second file starting at 35 seconds in and being 30 seconds long.


.


Comments

Popular Posts

How do I transmit a single hexadecimal value serial data in PuTTY using an Alt code?

I am trying to sent a specific hexadecimal value across a serial COM port using PuTTY. Specifically, I want to send the hex codes 9C, B6, FC, and 8B. I have looked up the Alt codes for these and they are 156, 182, 252, and 139 respectively. However, whenever I input the Alt codes, a preceding hex value of C2 is sent before 9C, B6, and 8B so the values that are sent are C2 9C, C2 B6, and C2 8B. The value for FC is changed to C3 FC. Why are these values being placed before the hex value and why is FC being changed altogether? To me, it seems like there is a problem internally converting the Alt code to hex. Is there a way to directly input hex values without using Alt codes in PuTTY? Answer What you're seeing is just ordinary text character set conversion. As far as PuTTY is concerned, you are typing (and reading) text , not raw binary data, therefore it has to convert the text to bytes in whatever configured character set before sending it over the wire. In other words, when y...

linux - Extract/save a mail attachment using bash

Using normal bash tools (ie, built-ins or commonly-available command-line tools), is it possible, and how to extract/save attachments on emails? For example, say I have a nightly report which arrives via email but is a zip archive of several log files. I want to save all those zips into a backup directory. How would I accomplish that? Answer If you're aiming for portability, beware that there are several different versions of mail(1) and mailx(1) . There's a POSIX mailx command, but with very few requirements. And none of the implementations I have seem to parse attachments anyway. You might have the mpack package . Its munpack command saves all parts of a MIME message into separate files, then all you have to do is save the interesting parts and clean up the rest. There's also metamail . An equivalent of munpack is metamail -wy .

performance - Single Threaded Qaud Core v.s Hyper-Threading Dual Core

Let's say we have two CPUs, One is Quad Core 3.2 Ghz with 4 Cores, and We have a Dual Core 3.2 Ghz with 2 Cores with 2 threads in each Core (Hyper-Threading). My assumption as a programmer will be, the 4 cores 4 threads should perform faster than 2 cores 4 threads since the second CPU needs to switch between threads in order to emulate 4 cores while the first one doesn't need to perform such switching as each core can perform independently and individually. I want to confirm that my assumption is true, if not please explain why one is better than the other. Answer I do believe thats true - since hyper threading does share some elements - specifically the main execution resources, you'll be able to run 4 full threads at once, rather than waiting for those resources to be freed up. The point of HT is to get better performance with a smaller use of die area - your quad core would generally be a bigger chip - say almost twice as large, than a non HT dual core chip, while a HT...

freeze - How do I stop windows 8.1 from freezing when the screen locks

This happens to me on a regular basis if I leave the computer for upwards of 10 minutes. It didnt do so at first but started after a couple of days. This is possibly related to further windows updates although nothing seems to tie in obviously when looking at my update history. I have to hold the power button in to power off. If the screens have switched off aswell they wont come back on, if they haven't I see the login picture and can move the mouse pointer but nothing happens and no combination of keyboard mashes or mouse clicks lets me see the login prompt. In the event log (type event viewer into the start menu) under system before every Critical problem (me powering down the machine without restarting) I get distributedCOM errors talking about this guid: "The server {BF6C1E47-86EC-4194-9CE5-13C15DCB2001} did not register with DCOM within the required timeout." I also get the same error for this 1B1F472E-3221-4826-97DB-2C2324D389AE. This seems to be a common theme and...