Skip to main content

graphics card - Why are my video colors getting messed up?


Since around October last year I've been having an on going issue with my HTPC where the color on video will randomly get messed up when watching full screen videos. The display ends up getting heavy pink or green tint to it or the colors appear to be inverted.


For example: Pink saturated image Green saturated image


It seems to happen most frequently when a video transitions between scenes or when entering/exiting full screen playback. It doesn't always happen however. Player software seems to be irrelevant, some seem to be more or less prone to it happening, but none are immune.


Turning the TV off and on again, or switching inputs will get the colors back to normal. Some players seem to detect this though and stop playback with no resume option. I presume for HDPC/DRM reasons. Sometimes after being fixed it will simply glitch again in a few minutes, other times it'll finish the video just fine (and typically glitch after leaving full screen mode).


What I've tried



  • Complete format and re-install of windows 10

  • New HDMI cables

  • New graphics card

  • Tried different HDMI ports

  • Cables are not loose


Setup details





At this point it seems like it is must be a TV problem, but I'm skeptical of that for two reasons. First, the TV's menu system seems to be unaffected. It still displays properly if opened when the problem occurs. Second, I also have a Roku (and previously a cable box) attached to the TV and neither of those have had any issues with their output.


Any ideas as to what is causing this, or what else to check for or try?



Answer



The solution to this problem seems to be to switch to AMD cards rather than Nvidia. I swapped in a AMD R7 250 and have been running it for a few weeks now without a single issue.


Prior to October when the issue started I had also been running an AMD card (HD 6570), which was swapped to a spare Nvidia card after it appeared to have stopped working.


Comments

Popular Posts

How do I transmit a single hexadecimal value serial data in PuTTY using an Alt code?

I am trying to sent a specific hexadecimal value across a serial COM port using PuTTY. Specifically, I want to send the hex codes 9C, B6, FC, and 8B. I have looked up the Alt codes for these and they are 156, 182, 252, and 139 respectively. However, whenever I input the Alt codes, a preceding hex value of C2 is sent before 9C, B6, and 8B so the values that are sent are C2 9C, C2 B6, and C2 8B. The value for FC is changed to C3 FC. Why are these values being placed before the hex value and why is FC being changed altogether? To me, it seems like there is a problem internally converting the Alt code to hex. Is there a way to directly input hex values without using Alt codes in PuTTY? Answer What you're seeing is just ordinary text character set conversion. As far as PuTTY is concerned, you are typing (and reading) text , not raw binary data, therefore it has to convert the text to bytes in whatever configured character set before sending it over the wire. In other words, when y...

linux - Extract/save a mail attachment using bash

Using normal bash tools (ie, built-ins or commonly-available command-line tools), is it possible, and how to extract/save attachments on emails? For example, say I have a nightly report which arrives via email but is a zip archive of several log files. I want to save all those zips into a backup directory. How would I accomplish that? Answer If you're aiming for portability, beware that there are several different versions of mail(1) and mailx(1) . There's a POSIX mailx command, but with very few requirements. And none of the implementations I have seem to parse attachments anyway. You might have the mpack package . Its munpack command saves all parts of a MIME message into separate files, then all you have to do is save the interesting parts and clean up the rest. There's also metamail . An equivalent of munpack is metamail -wy .

ubuntu - Why does my USB hdd returns SG_IO: bad/missing sense data?

I am able to boot and run commands from external USB hdd; the message in question appears for about 45 seconds then booting continues. GRUB2 is installed on internal HDD. When choosing to boot directly to /dev/sdb the message doesn't appear, however boot time is about the same as booting to internal HDD. /dev/sdb: Timing cached reads: 1018 MB in 2.00 seconds = 508.97 MB/sec Timing buffered disk reads: 80 MB in 3.03 seconds = 26.37 MB/sec pfeiffep@de:~$ sudo hdparm -i /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 10 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_GET_IDENTITY failed: Invalid argument Gparted correctly identifies the drive as SAMSUNG MP0402H. Any ideas how to remedy the HDIO & SG_IO messages?

Desktop reboots itself on sleep or hibernate

I have been using an ASUS M2NPV-VM motherboard for main home desktop workstation, operating Windows Vista x64. This computer has right from day one not been able to enter hibernate or standby; after Windows performs its final actions and brings the machine down, it would automatically revive itself for a reboot. Updating to the second latest BIOS (1201)has not helped (the latest BIOS revision would induce video refresh problems rendering it unusable). I have been reading related discussions on incidents similar to mine to no avail of a true workable solution. They appear to be more speculative guesses rather than actual knowledge on the inner workings of motherboard hardware. Does anybody have any electronic engineering experience on PC energy-saving standards to provide a more informed opinion how to go about getting this to work? More stories: this motherboard could not even reboot properly the first thing i used it. It was due to refresh rate of the onboard GPU, which had no influe...