Skip to main content

Networking - Games can't see/join anyone else's LAN servers, unless I host


This happens with various games, from Battlefield 2 to Trackmania and therefore seems to be some network configuration error:


When anyone else hosts a LAN game I am the only one that can't see their server in the in-game server browser, nor can I join it with a direct IP connection. However, when I host the game everyone else is capable of joining my server without any problems. I am also the only one on the network experiencing these issues.


Things I already checked:



  • Windows Firewall is set to allow each application (and the problem still happens when it is completely disabled)

  • Other networking an internet programs like browsers, e-mail, ssh and ftp are working perfectly fine

  • Various static/dynamic IP address/subnet mask and default gateway settings don't fix the problem



Answer



The problem seemed to be that the games don't properly handle my PC having multiple network adapters. They then connect using the wrong network adapter and only see that adapter's own network/subnet.


In my case this was caused by the Virtualbox network adapter, although it also seems to be common with other software adapters such as Hamachi. The simplest solution I could find was to disable the problematic adapter before playing any game. Other possible options are to disable all other network adapters except the one for your current network or to correctly setup the priority of your network adapters.


The priority of the network adapters can be set by following this procedure in Windows Vista/Seven (source):



  • Open 'Network and Sharing Center'

  • Choose 'Change adapter' settings

  • Hit ALT on your keyboard to show the menus

  • From the 'Advanced' menu choose 'Advanced Settings'

  • Under the 'Adapters and Bindings' tab select your proper network adapter from the 'Connections list'

  • Use the green arrow on the right to move it to the top of the Windows Network Adapter Priority List

  • Click 'OK' to apply the new settings and you are done!


Comments

Popular Posts

How do I transmit a single hexadecimal value serial data in PuTTY using an Alt code?

I am trying to sent a specific hexadecimal value across a serial COM port using PuTTY. Specifically, I want to send the hex codes 9C, B6, FC, and 8B. I have looked up the Alt codes for these and they are 156, 182, 252, and 139 respectively. However, whenever I input the Alt codes, a preceding hex value of C2 is sent before 9C, B6, and 8B so the values that are sent are C2 9C, C2 B6, and C2 8B. The value for FC is changed to C3 FC. Why are these values being placed before the hex value and why is FC being changed altogether? To me, it seems like there is a problem internally converting the Alt code to hex. Is there a way to directly input hex values without using Alt codes in PuTTY? Answer What you're seeing is just ordinary text character set conversion. As far as PuTTY is concerned, you are typing (and reading) text , not raw binary data, therefore it has to convert the text to bytes in whatever configured character set before sending it over the wire. In other words, when y...

linux - Extract/save a mail attachment using bash

Using normal bash tools (ie, built-ins or commonly-available command-line tools), is it possible, and how to extract/save attachments on emails? For example, say I have a nightly report which arrives via email but is a zip archive of several log files. I want to save all those zips into a backup directory. How would I accomplish that? Answer If you're aiming for portability, beware that there are several different versions of mail(1) and mailx(1) . There's a POSIX mailx command, but with very few requirements. And none of the implementations I have seem to parse attachments anyway. You might have the mpack package . Its munpack command saves all parts of a MIME message into separate files, then all you have to do is save the interesting parts and clean up the rest. There's also metamail . An equivalent of munpack is metamail -wy .

ubuntu - Why does my USB hdd returns SG_IO: bad/missing sense data?

I am able to boot and run commands from external USB hdd; the message in question appears for about 45 seconds then booting continues. GRUB2 is installed on internal HDD. When choosing to boot directly to /dev/sdb the message doesn't appear, however boot time is about the same as booting to internal HDD. /dev/sdb: Timing cached reads: 1018 MB in 2.00 seconds = 508.97 MB/sec Timing buffered disk reads: 80 MB in 3.03 seconds = 26.37 MB/sec pfeiffep@de:~$ sudo hdparm -i /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 10 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HDIO_GET_IDENTITY failed: Invalid argument Gparted correctly identifies the drive as SAMSUNG MP0402H. Any ideas how to remedy the HDIO & SG_IO messages?

Desktop reboots itself on sleep or hibernate

I have been using an ASUS M2NPV-VM motherboard for main home desktop workstation, operating Windows Vista x64. This computer has right from day one not been able to enter hibernate or standby; after Windows performs its final actions and brings the machine down, it would automatically revive itself for a reboot. Updating to the second latest BIOS (1201)has not helped (the latest BIOS revision would induce video refresh problems rendering it unusable). I have been reading related discussions on incidents similar to mine to no avail of a true workable solution. They appear to be more speculative guesses rather than actual knowledge on the inner workings of motherboard hardware. Does anybody have any electronic engineering experience on PC energy-saving standards to provide a more informed opinion how to go about getting this to work? More stories: this motherboard could not even reboot properly the first thing i used it. It was due to refresh rate of the onboard GPU, which had no influe...