Skip to main content

ssd - Low disk space on drive C with Windows 10


I have a "haier laptop y11b" it have 2 disks:



  1. SSD card of 29 GB, C drive on which windows 10 is installed

  2. HDD 465 GB


Previously Windows 8.1 was installed on this laptop and all the apps were installed on drive D. It was fine, showing no problems. There was always 13 GB or more free space available on C.


Then I installed windows 10. After installation on drive C, 15 GB was still free.


Then due to low space on C, I installed all of my apps on drive D, but space was still occupied on drive C. And now only 938 MB is free on C, and its marked red with error "low space on c".


Now I don't understand what is consuming drive C's space in windows 10, while there was no such problem with windows 8.1. How do I free out the space on C, while only windows 10 is installed there?



I downloaded WinDirStat and scanned C. I found a few large folders and files:



  • Windows\WinSxS = 8.0 GB

  • Windows\Installer = 3.1 GB

  • ProgramData\Package cache = 1.2 GB

  • pagefile.sys = 1.4GB

  • hiberfile.sys = 803MB


windirstat image


Can I delete or move any file to other drives just to free up space on my SSD?



Answer



pagefile.sys is an important Windows file. Delete that, and your computer won't restart. So you'd rather not delete it. ;)


This article explains WinSxS: http://www.thewindowsclub.com/winsxs-folder-windows-7-8


So basically, there is a way to clean the WinSxS folder. You might want to run the Disk Cleanup tool that comes with Windows or download a cleanup tool, such as CCleaner. From there, do not forget to uninstall useless apps and delete files you do not use.


There is also ways to tell your computer to install every apps automatically on your drive D:.



To change the registry, follow these steps:



  1. Start Registry Editor by entering Regedit in the search All programs.

  2. Locate the following: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

  3. Right click on the value named ProgramFilesDir & change the default value C:\Program Files to the path you want to install all your programs in.

  4. Click OK and Exit.


Source



Assuming you are using a Windows 10 64-bit, make this change as well:



  1. Press the Windows key + R on your keyboard type regedit and press Enter key.

  2. Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

  3. Change the Path in DWORDs ProgramFilesDir, ProgramFilesDir (x86) to the new path.


Little reminder


This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: 322756: How to back up and restore the registry in Windows



If you'd like to move Windows Apps, follow these steps:



  1. Press Windows key + I on your keyboard

  2. Go in System, then Storage in the left menu

  3. Select new Path in New apps with save to (Refer to picture)


Image


Source



You can also Move already installed apps. The procedure is almost the same.



Press Ctrl + I to bring up the Settings menu. Now click System, then select Apps & features (Or Installed Apps) from the left-hand navigation.


Here you will find a list of all apps and programs installed on your system. Note that this move method will only work for apps that you have installed – that means those which were pre-installed can’t be moved.


Scroll to the app that you want to move and select it from the list. Now, click Move. Select the new drive location from the dropdown, then click Move.


enter image description here


Source



Comments

Post a Comment

Popular Posts

Use Google instead of Bing with Windows 10 search

I want to use Google Chrome and Google search instead of Bing when I search in Windows 10. Google Chrome is launched when I click on web, but it's Bing search. (My default search engine on Google and Edge is http://www.google.com ) I haven't found how to configure that. Someone can help me ? Answer There is no way to change the default in Cortana itself but you can redirect it in Chrome. You said that it opens the results in the Chrome browser but it used Bing search right? There's a Chrome extension now that will redirect Bing to Google, DuckDuckGo, or Yahoo , whichever you prefer. More information on that in the second link.
Post a Comment
Read more

linux - Using an index to make grep faster?

I find myself grepping the same codebase over and over. While it works great, each command takes about 10 seconds, so I am thinking about ways to make it faster. So can grep use some sort of index? I understand an index probably won't help for complicated regexps, but I use mostly very simple patters. Does an indexer exist for this case? EDIT: I know about ctags and the like, but I would like to do full-text search. Answer what about cscope , does this match your shoes? Allows searching code for: all references to a symbol global definitions functions called by a function functions calling a function text string regular expression pattern a file files including a file
Post a Comment
Read more

How do I transmit a single hexadecimal value serial data in PuTTY using an Alt code?

I am trying to sent a specific hexadecimal value across a serial COM port using PuTTY. Specifically, I want to send the hex codes 9C, B6, FC, and 8B. I have looked up the Alt codes for these and they are 156, 182, 252, and 139 respectively. However, whenever I input the Alt codes, a preceding hex value of C2 is sent before 9C, B6, and 8B so the values that are sent are C2 9C, C2 B6, and C2 8B. The value for FC is changed to C3 FC. Why are these values being placed before the hex value and why is FC being changed altogether? To me, it seems like there is a problem internally converting the Alt code to hex. Is there a way to directly input hex values without using Alt codes in PuTTY? Answer What you're seeing is just ordinary text character set conversion. As far as PuTTY is concerned, you are typing (and reading) text , not raw binary data, therefore it has to convert the text to bytes in whatever configured character set before sending it over the wire. In other words, when y...
Post a Comment
Read more

linux - CentOs 7.1 - Install Tomcat 8

I am using this tutorial as a setup reference to getting a Tomcat 8 running on CentOs 7.1 , but after typing: [root@localhost tomcat]# sudo systemctl start tomcat I get the error: Job for tomcat.service failed. See 'systemctl status tomcat.service' and 'journalctl -xn' for details. systemctl status tomcat.service prints the following: [root@localhost tomcat]# systemctl status tomcat.service tomcat.service - Apache Tomcat Web Application Container Loaded: loaded (/etc/systemd/system/tomcat.service; disabled) Active: failed (Result: exit-code) since Wed 2015-11-25 16:54:33 CET; 1min 19s ago Process: 45873 ExecStart=/opt/tomcat/bin/startup.sh (code=exited, status=203/EXEC) Nov 25 16:54:33 localhost.localdomain systemd[1]: Starting Apache Tomcat Web Application Container... Nov 25 16:54:33 localhost.localdomain systemd[1]: tomcat.service: control process exited, code=exited status=203 Nov 25 16:54:33 localhost.localdomain systemd[1]: Failed to start Apache Tomcat Web App...
Post a Comment
Read more