Skip to main content

networking - How does my computer's firewall work? Like inbound rule, outbound rule, reply?


So I understand how NAT works, but I don't understand how firewall works. With non-symmetric NAT, if someone sends me a packet, it gets blocked, but it I send someone a packet and they get that packet and then send it back to me, it gets through. I have Windows Firewall on my computer. Does the firewall work the same way (like does it block replies too?)?


My Windows Firewall has some inbound and outbound rules. It also has an option for "all inbound traffic are blocked". When I select "all inbound traffic are blocked" for all networks (public and private), TeamViewer and Skype can still get through (they apparently have inbound rules that were set at installation). Are these inbound rules what allow them to get through? How do the inbound/outbound rules work? If I have "all inbound traffic are blocked" set up and then send someone a packet and they send it back to me, will it still go through? Or does "all inbound traffic are blocked" prevent that?


Please explain software firewall to me. The online resources suck.



Answer



TL;DR, yes, it means that if you make a connection outbound, that the service you connected to can respond. They cannot connect to you unsolicited however, unless you set up port forwarding rules to allow them to.


First, you are confusing Asymetric NAT with Stateful Packet Filtering. NAT does not actually firewall anything, it just allows ports to be translated from source to destination. SPF is whats responsible for allowing only solicited responses to traffic.


TCP is a connection orriented protocol, in that both sides of the transmission negotiate and maintain a virtual connection (a flow of packets that are related, such that the order of packets can be maintained even if they arrive out of order, malformed or missing packets are easily noticed so a resend can be requested, and can perform flow control operations to make sure that traffic does not cause too much congestion).


This connection-orrientation allows the firewall to tell whether a given packet is asking for a new connection, or part of an existing and established one.


SPF is generally set up to allow all outgoing connection attempts, and to allow remote servers to whom a connection has been attempted, to reply in-band within that connection (eg the packet comes from the right source on the right port, has SYN/ACK flags set correctly, and has the correct SYN and ACK values) to come through the NAT.


What SPF generally DOESN'T allow, is a remote server initiating a connection to a service inside the NAT wall. so you can request a remote servers resources, and it can send them to you, but the remote server cannot request your resources.


Port forwarding or Destination NAT allows you to set up a service so that outside servers can initiate connections to it to request resources. you only want to do this if absolutely necessary, as it does open up the service to potential attacks.


Note that with PortForwarding, even once you have a port set up to expose your internal service, you must still allow that port through the firewall, as an incoming connection.


As for what you are seeing with Skype and windows firewall, when it says "block all incomming connections" it means that it will not allow a remote server to create an unsolicited connection to your box. it does NOT mean that it will block replies that are part of a connection initiated from your PC however, so Skype can connect to the skype servers, and those servers can respond as part of that connection.


hope that helps.


Comments

Post a Comment

Popular Posts

How do I transmit a single hexadecimal value serial data in PuTTY using an Alt code?

I am trying to sent a specific hexadecimal value across a serial COM port using PuTTY. Specifically, I want to send the hex codes 9C, B6, FC, and 8B. I have looked up the Alt codes for these and they are 156, 182, 252, and 139 respectively. However, whenever I input the Alt codes, a preceding hex value of C2 is sent before 9C, B6, and 8B so the values that are sent are C2 9C, C2 B6, and C2 8B. The value for FC is changed to C3 FC. Why are these values being placed before the hex value and why is FC being changed altogether? To me, it seems like there is a problem internally converting the Alt code to hex. Is there a way to directly input hex values without using Alt codes in PuTTY? Answer What you're seeing is just ordinary text character set conversion. As far as PuTTY is concerned, you are typing (and reading) text , not raw binary data, therefore it has to convert the text to bytes in whatever configured character set before sending it over the wire. In other words, when y...
Post a Comment
Read more

linux - Extract/save a mail attachment using bash

Using normal bash tools (ie, built-ins or commonly-available command-line tools), is it possible, and how to extract/save attachments on emails? For example, say I have a nightly report which arrives via email but is a zip archive of several log files. I want to save all those zips into a backup directory. How would I accomplish that? Answer If you're aiming for portability, beware that there are several different versions of mail(1) and mailx(1) . There's a POSIX mailx command, but with very few requirements. And none of the implementations I have seem to parse attachments anyway. You might have the mpack package . Its munpack command saves all parts of a MIME message into separate files, then all you have to do is save the interesting parts and clean up the rest. There's also metamail . An equivalent of munpack is metamail -wy .
Post a Comment
Read more

performance - Single Threaded Qaud Core v.s Hyper-Threading Dual Core

Let's say we have two CPUs, One is Quad Core 3.2 Ghz with 4 Cores, and We have a Dual Core 3.2 Ghz with 2 Cores with 2 threads in each Core (Hyper-Threading). My assumption as a programmer will be, the 4 cores 4 threads should perform faster than 2 cores 4 threads since the second CPU needs to switch between threads in order to emulate 4 cores while the first one doesn't need to perform such switching as each core can perform independently and individually. I want to confirm that my assumption is true, if not please explain why one is better than the other. Answer I do believe thats true - since hyper threading does share some elements - specifically the main execution resources, you'll be able to run 4 full threads at once, rather than waiting for those resources to be freed up. The point of HT is to get better performance with a smaller use of die area - your quad core would generally be a bigger chip - say almost twice as large, than a non HT dual core chip, while a HT...
Post a Comment
Read more

freeze - How do I stop windows 8.1 from freezing when the screen locks

This happens to me on a regular basis if I leave the computer for upwards of 10 minutes. It didnt do so at first but started after a couple of days. This is possibly related to further windows updates although nothing seems to tie in obviously when looking at my update history. I have to hold the power button in to power off. If the screens have switched off aswell they wont come back on, if they haven't I see the login picture and can move the mouse pointer but nothing happens and no combination of keyboard mashes or mouse clicks lets me see the login prompt. In the event log (type event viewer into the start menu) under system before every Critical problem (me powering down the machine without restarting) I get distributedCOM errors talking about this guid: "The server {BF6C1E47-86EC-4194-9CE5-13C15DCB2001} did not register with DCOM within the required timeout." I also get the same error for this 1B1F472E-3221-4826-97DB-2C2324D389AE. This seems to be a common theme and...
Post a Comment
Read more